3D-Printed Concrete: Tracking Strain between Layers

A Rowan University study reconstructs strain in 3D-printed concrete and offers lessons for experimental testing and quality control in Mexico.

CIVIL ENGINEERING

ASCE México

11/15/20262 min read

A Rowan University study uses photographs analyzed in reverse chronological order to reconstruct concrete deformation during fabrication. For Mexican teams exploring 3D printing, it provides an experimental reference for designing tests and documenting the early-age behavior of printed elements.

Measuring a Structure as It Takes Shape

In 3D concrete printing, the first layers carry the weight of subsequent layers while the material is still changing. Reconstructing that history helps researchers study the fabrication process, beyond examining the geometry of the completed element.

On October 13, 2026, Rowan University in the United States presented a method developed by a team led by Islam Mantawy and Behrad Koohbor. The approach adapts digital image correlation, or DIC, which compares photographs to estimate displacements and strains. The challenge is that, when printing begins, the complete specimen that would serve as a reference does not yet exist.

The solution is to work backward through the photographic sequence, starting with the completed element. Its rough surface provides the visual pattern used to track changes. This allows the researchers to reconstruct what happened during deposition and curing. Source: Rowan University.

What the Study Demonstrates and What Still Requires Verification

The scientific paper was published on October 8 in Experimental Mechanics. Its authors developed a theoretical framework and evaluated the procedure through quasi-static tensile tests on AA6061 aluminum specimens, comparing conventional measurements with results reconstructed in reverse chronological order. They then applied it to a concrete additive-manufacturing case.

The paper’s abstract reports the reconstruction of displacement and strain fields, as well as the measurement of residual strains associated with the printing process. This evidence supports an experimental analysis tool. Because the method is retrospective, the procedure described should not be presented as an alarm that automatically stops a printer before failure. Nor does it, by itself, demonstrate the structural safety of a completed building. Source: original paper.

A Testing Approach for Mexico

As a proposed practical application, a Mexican university, laboratory, or company could begin with a test element and a narrowly defined question: how does strain in the lower layers change when the interval between printing passes is varied? The comparison would need to maintain documented mix, geometry, and environmental conditions to avoid attributing effects from multiple variables to a single factor.

Before testing, the team should define camera placement and calibration, lighting, image-capture frequency, and synchronization with the printing log. It should also anticipate visual obstructions and retain the original files. An engaging video is insufficient if it does not allow the measurement conditions to be reconstructed afterward.

The next step would be to compare the image-based results with independent measurements and tests appropriate to the material and construction system. Acceptance criteria, uncertainty, and review responsibilities must be established before the results are used to make decisions.

For civil engineering in Mexico, the immediate value of this case lies in learning to observe and compare new processes using verifiable evidence. A well-documented pilot would allow teams to discuss which parameters should be adjusted and which validations remain outstanding before scaling up.

Leer este artículo en español

Contact

We are always here to help

SOCIAL MEDIA

LINKS OF INTEREST

© 2026 ASCE Mexico. All rights reserved.